菲尼克斯端子材質的問題

Terminal material problems

端子的構成還是比較簡單的，它是由一段封在絕緣塑料里面的金屬片（通常是銅件），兩端都有孔可以插入導線，亦或者有螺絲用于緊固/松開。

The composition of the terminal is relatively simple. It consists of a piece of metal (usually copper) sealed in insulating plastic. There are holes at both ends to insert wires, or there are screws for fastening / loosening.

而銅件在一般的情況下老化速度是比較慢的，并且在加工的過程中也鍍層金屬！倘若銅件發黑的話，可能就是發生化學反應——氧化，其原因是加工的過程電鍍和保護環節沒有做好；其次銅材質不存（銅件含有鐵），如果在銅銹中發現褐色物質，就說明其中含有鐵雜質。

In general, the aging speed of copper parts is relatively slow, and they are also coated with metal in the process of processing! If the copper parts are blackened, it may be a chemical reaction - oxidation. The reason is that the electroplating and protection links in the processing process are not done well; Secondly, the copper material does not exist (copper parts contain iron). If Brown substances are found in the copper rust, it means that there are iron impurities in it.

解決方案：要購買正規廠家的接線端子，防止出現接線端子銅件生銹的情況。

Solution: the wiring terminals of regular manufacturers shall be purchased to prevent the copper parts of the wiring terminals from rusting.

菲尼克斯端子外部的因素

External factors of terminal

對于這種外部情況情，通常有兩大原因，一是在高溫或者低溫的情況下銅件的老化速度是很快的，二是過大的電流會是接線端子發熱發燙，而這就會破壞其絕緣層和保護層，同樣也會加劇端子老化的速度。

There are usually two reasons for this external situation. One is that the aging speed of copper parts is very fast under high or low temperature. The other is that excessive current will cause the wiring terminal to heat up, which will damage its insulation layer and protective layer, and also aggravate the aging speed of the terminal.

解決方案：對于環境惡例的情況下，這里就可以考慮給接線端子加上防護罩或塑料蓋。

Solution: in the case of environmental cases, we can consider adding protective covers or plastic covers to the wiring terminals.

對于電流過大的情況，這里就需要定時檢查，遇到接線端子發熱熱燙電氣情況，就要及時排除原因，從而延長接線端子的使用壽命。

In case of excessive current, regular inspection is required here. In case of heating and scalding of the wiring terminal, the cause shall be eliminated in time, so as to prolong the service life of the wiring terminal.

以上端子銅件生銹的原因以及解決方案，希望對大家有所幫助！更多端子等產品的相關信息您可以關注我們的網站www.haoyuanxb.com來咨詢了解！

The causes and solutions of the above terminal copper parts rusting, I hope to help you! For more information about terminals and other products, you can follow our website www.jntongyu Com to inquire about!